Idle Air Control System Rpm Higher Than Expected
Idle Air Control System Rpm Higher Than Expected. Diagnostic trouble code (dtc) p0506 stands for “idle air control system rpm lower than expected.” it means that your powertrain control module (pcm) has detected an engine idle speed lower than the specified revolution. The throttle is controlled by sensors and the pcm and the engine idle speed is controlled by the idle air control system.
The throttle is controlled by sensors and the pcm and the engine idle speed is controlled by the idle air control system. What the p0506 code means. This particular code shows that the engine computer detected the idle speed exceeded the manufacturer’s specifications over a certain period of time.
Obd2 Code P0507 Audi Definition:
This p0507 audi code is one that’s sometimes triggered on vehicles that have electronic throttle control. It is typically triggered when the engine idle speed is 200 rpm or more over the predetermined limit set by the manufacturer. Since the idle air control system is in constant communication with the powertrain control module, any erratic behavior coming from the idle air control system will prompt the module to warn you about it.
When This Code Has Been Triggered, It Will Put Your Car Into The Failsafe Mode.
2006 nissan frontier with 4.0 liter v6 engine The ecu has a specific rpm range the idle is allowed and when it is higher than expected the ecu sets the p0507 code. This is a result of my cleaning the tb (first time ever for this car and overdue.) the idle was correct beforehand at 600 to 700 rpm.) cleaning the throttle body (lots of black soot took me.
The Ecu Comes With A Particular Rpm Range That The Idle Control System Can Reach.
The operating of the throttle valve is varied to allow for optimum control of the engine idling speed. This code is triggered when engine idle speed is higher than it desired rate set by the manufacturer. The screen on the scanning tool will likely display trouble code p0507.
Diagnostic Trouble Code (Dtc) P0506 Stands For “Idle Air Control System Rpm Lower Than Expected.” It Means That Your Powertrain Control Module (Pcm) Has Detected An Engine Idle Speed Lower Than The Specified Revolution.
This particular code shows that the engine computer detected the idle speed exceeded the manufacturer’s specifications over a certain period of time. Depending on year, make, and model, dtc p0507 may have number of causes. The idle air control system makes sure that the engine of the car is running at optimal idle speed when the car is not moving.
This Verifies That The Idle Air Control System Rpm Is Higher Than Expected.
What does the p0507 code mean? In the case of gm vehicles (and possibly others) if the idle speed is over 200 rpm higher than expected, this code will be set. Once this code is triggered it puts the vehicle into a failsafe mode and the check engine light is illuminated on the dashboard.
Post a Comment for "Idle Air Control System Rpm Higher Than Expected"