Strut to knuckle 135 ft. Under no circumstances use pneumatic or electric screwdrivers to screw in and tighten the wheel bolts. Honda s2000 tighten wheel lug nuts costs starting from $95.
Strut Mount To Body 35 Ft.lbs.
Using the proper torque helps ensure that the wheel assembly is securely installed. Under no circumstances use pneumatic or electric screwdrivers to screw in and tighten the wheel bolts. Adjustment link to rear suspension 55 ft.lbs.
Strut Mount Nut 55 Ft.lbs.
Stabilizer bar link nut 13 ft.lbs. The table can be filtered and is searchable. You should tighten the bolts or screws in a part to about half of the torque spec first.
I Put My Winters On Last Week And Torqued Them To 80 Ft/Lbs, Which Seems To Be To Spec.
Below is my latest wheel lug nut torque chart. Reference the model year in the table to see what lug. You might wanna put 100lb for added safety.
I Decided To Check Again After Another 70 Km, And Some Of Them Needed Tightening Again.
Strut to knuckle 135 ft. S2000 ap1 torque specs for various bolts (in alpha order) these were all taken from a shop manual. My corvette has slightly larger wheel studs and they are torqued to 100.
Check All Wheel Bolts Or Lug Nuts In The Same Sequence And Retighten To The Prescribed Tightening Torque If Necessary.
Finally, every time you try to install new wheels for the s2000, it is. The parts and labor required for this service are. The fronts seem to need it more than the rears.
Post a Comment for "S2000 Lug Nut Torque"